Daylite Firmware Installation

Next Steps After Installation

WiFi Connection Setup
1. Look for "WeatherBoxAP" in your WiFi networks
2. Connect to the "WeatherBoxAP" network
3. The configuration portal should open automatically
4. If the portal doesn't open, navigate to: http://192.168.4.1
Menu Navigation Guide
↓

Swipe DOWN to open the menu

↑

Swipe UP to close the menu

Port Selection When selecting a port, make sure to choose the one labeled "USB Serial" from the dropdown menu.
First-Time Installation Some devices require manual activation of flash mode:
- Hold down the RST button while starting the installation process
- Alternative method: Hold BOOT button → Press & release RST → Release BOOT
USB Connection Issues For devices with multiple USB ports:
- If your device has both USB-C and Micro-USB, try both connections
- Some models only accept updates through specific ports
Connection Problems If the installation gets stuck:
- Try using a different USB cable
- Default cables may not be reliable for updates
- Use a high-quality data transfer cable